first few days dealing with the ion source and Einzel lens and then the bending magnet flight tube
magnet half = 1.25 tons power supply 6kW for max field across 50mm gap of 2.25Tesla 22500 gauss
magnet halves separated
maintenance at work
Forum rules
This is a good place to put pix of your lab or shop intended to produce the drool reaction. If topics get lengthy here, we may want to move most of the discussion to where it fits in the org scheme here (such as it is). Good place for announcements of things you just got working and so on. Respecting readers who may not have large bandwidth, try and keep the pictures to about one megapixel -- we have the BW and the storage here, no problems, but some readers may not.
This is a good place to put pix of your lab or shop intended to produce the drool reaction. If topics get lengthy here, we may want to move most of the discussion to where it fits in the org scheme here (such as it is). Good place for announcements of things you just got working and so on. Respecting readers who may not have large bandwidth, try and keep the pictures to about one megapixel -- we have the BW and the storage here, no problems, but some readers may not.
maintenance at work
I took one of our implanters to bits to give it a Birthday
first few days dealing with the ion source and Einzel lens and then the bending magnet flight tube
magnet half = 1.25 tons power supply 6kW for max field across 50mm gap of 2.25Tesla 22500 gauss
magnet halves separated I then removed the flight tube for a deep clean
then all back together keeps me off the streets
first few days dealing with the ion source and Einzel lens and then the bending magnet flight tube
magnet half = 1.25 tons power supply 6kW for max field across 50mm gap of 2.25Tesla 22500 gauss
magnet halves separated I then removed the flight tube for a deep clean
then all back together keeps me off the streets